MECHANICAL

Body Material Polycarbonate

Diffuser Material Polycarbonate

Fitting Colour White

Installation Type Wall or Ceiling

IP RatingIP20

ELECTRICAL

Electrical Rating Class II

Input Frequency 50 Hz

Input voltage230VacIn Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%

Maximum Wattage3.5 W

Standby Power 2.2 W Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge

.Working Temp Range0 to 40 °C

DRIVER

Driver Included Yes

Integrated Driver Yes

Wiring Type Re-wireable terminal block (3 pin)

EMERGENCY (EM SUFFIX)

Replacement Battery Code 01307

Emergency ClassificationC0:D5, C90:D5

Decal Size300 x 150 mm

Emergency Duration 90 mins

Emergency Mode Maintained

Emergency Output Power1000 mW

Viewing Distance24 m

COMPLIANCE

Product Design Life 6 yearsThe product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use

.Standards

• AS/NZS 60598.1

• AS 60598.2.22

• AS/NZS 61347.1

• AS/NZS 61347.2.13

• AS CISPR 15

• AS/NZS 2293.3

WARRANTY

Commercial Use Warranty5 RTB (Total 5 Years)