Mechanical

Adjustability Fixed

Body Material Aluminium

Product Finish Power coated

Fitting Colour White

IC Rating IC-4

IC-4 rating has been conducted at the products maximum working Temperature Range (C) in line with Australian standards. This provides the required safety when covered with insulation and used in Australian Environments.

Installation Type Recessed

IP Rating IP65 Front Face Only

Electrical

Electrical Rating Class II

Input Frequency 50 Hz

Input voltage 230Vac

In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%

Maximum Wattage 12 W

Power Factor 0.9

Switch Type Inline

System Max Wattage 12 W

Working Temp Range 0 to 40 °C

Lamp

Beam Angle 120 °

CCT Configuration Single

CRI >80

Lamp/LED Current 350 mA

LED Type Diffused

Number of Lamps 1

System Efficiency 81 lm/W

LED Lifetime

LED Lifetime 102000 hrs

This is the Reported LED Lifetime in Hours based on TM-21. Atom does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states "The Calculated and Projected Lp(Dk) are not to be reported". This Lifetime refers to the life of a single LED however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average led is performing above the specification and compensates for the LEDs falling below.

LED Lifetime Rating L70B10

LED Lifetime Ratings (Failure rate & lumen depreciation)

Ambient Temp (°C) 25 °C 40 °C

L90B10 55000 hrs 54000 hrs

L80B10 102000 hrs 102000 hrs

L70B10 102000 hrs 102000 hrs

L70B50 102000 hrs 102000 hrs

This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717.

TM-21 Test Hours 17000 hrs

Colour temperature

CCT 4000 K

CCT Colour Cool White

Luminaire Lumens 1050 lm

All photometric data has a tolerance of ±10%. Luminaire lumens refers to the exit lumens or delivered lumens from the luminaire.

Driver

Dimmable Yes

Driver Code 10974

Driver Included Yes

Integrated Driver No

Driver Type Dimmable ( Phase cut)

Driver Warranty 3 Yr

Flex & Plug or Lead Length 120 mm

Wiring Type Re-wireable Flex & Plug (2 pin)

Energy Savings Scheme

Ipart Approval Yes

REES Approval Yes

VEU Approval Yes

Compliance

Standards

AS/NZS 60598.1

AS/NZS 60598.2.2

AS/NZS 61347.1

AS/NZS 61347.2.13

AS CISPR 15

AS 1530.4:2014

Warranty