AT9012 FR 12W LED Fire Rated Downlight With Dimmable Driver
Features
Ideal for residential, retail, showroom and decorative lighting applications
Acoustic rating according to AS/NZS ISO 717.1:2004
Fire rating according to AS1530.4:2014 (_/120/120)
Supplied with a dimmable LED driver
Long life and durability
Suitable for 24 hour use
Mechanical
Adjustability- Fixed
Body Material- Aluminium
Product Finish- Power coated
Fitting Colour- White
IC Rating- IC-4
Colour temperature
CCT 4000 K
CCT Colour- Cool White
Luminaire Lumens- 1050 lm
Dimmable- Yes
Additional Info
Mechanical
Adjustability Fixed
Body Material Aluminium
Product Finish Power coated
Fitting Colour White
IC Rating IC-4
IC-4 rating has been conducted at the products maximum working Temperature Range (C) in line with Australian standards. This provides the required safety when covered with insulation and used in Australian Environments.
Installation Type Recessed
IP Rating IP65 Front Face Only
Electrical
Electrical Rating Class II
Input Frequency 50 Hz
Input voltage 230Vac
In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Maximum Wattage 12 W
Power Factor 0.9
Switch Type Inline
System Max Wattage 12 W
Working Temp Range 0 to 40 °C
Lamp
Beam Angle 120 °
CCT Configuration Single
CRI >80
Lamp/LED Current 350 mA
LED Type Diffused
Number of Lamps 1
System Efficiency 81 lm/W
LED Lifetime
LED Lifetime 102000 hrs
This is the Reported LED Lifetime in Hours based on TM-21. Atom does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states "The Calculated and Projected Lp(Dk) are not to be reported". This Lifetime refers to the life of a single LED however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average led is performing above the specification and compensates for the LEDs falling below.
LED Lifetime Rating L70B10
LED Lifetime Ratings (Failure rate & lumen depreciation)
Ambient Temp (°C) 25 °C 40 °C
L90B10 55000 hrs 54000 hrs
L80B10 102000 hrs 102000 hrs
L70B10 102000 hrs 102000 hrs
L70B50 102000 hrs 102000 hrs
This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717.
TM-21 Test Hours 17000 hrs
Colour temperature
CCT 4000 K
CCT Colour Cool White
Luminaire Lumens 1050 lm
All photometric data has a tolerance of ±10%. Luminaire lumens refers to the exit lumens or delivered lumens from the luminaire.
Driver
Dimmable Yes
Driver Code 10974
Driver Included Yes
Integrated Driver No
Driver Type Dimmable ( Phase cut)
Driver Warranty 3 Yr
Flex & Plug or Lead Length 120 mm
Wiring Type Re-wireable Flex & Plug (2 pin)
Energy Savings Scheme
Ipart Approval Yes
REES Approval Yes
VEU Approval Yes
Compliance
Standards
AS/NZS 60598.1
AS/NZS 60598.2.2
AS/NZS 61347.1
AS/NZS 61347.2.13
AS CISPR 15
AS 1530.4:2014
Warranty