Mercury Professional Emergency Exit, 24m
Features
Single and double sided decals
Soft-start charger to reduce building load
Available in low illumination area black model
IP65 Weatherproof Case available but not included
Fast emergency switch-over (<0.5s) for high-task areas
Wall, ceiling, chain and rod mounting (with Rod Mount Kit)
Long life electronics
12 years design life at max. ambient
High Quality Lithium battery (LiFePO4) and smart charger
Standalone (SPU)
Self test (AS2293/ IEC62034
IEC62386 over IEC62386-104
Ektor wired monitored system
Wireless monitoring via Ektor Lynk
Additional Info
MECHANICAL
Body Material Polycarbonate
Diffuser Material Polycarbonate
Fitting Colour White
Installation Type Wall or Ceiling
IP Rating IP20
ELECTRICAL
Electrical Rating Class II
Input Frequency 50 Hz
Input voltage 230Vac
In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Maximum Wattage 4.5 W
Standby Power 3 W
Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge.
Working Temp Range 0 to 40 °C
COLOUR TEMPERATURE
LED Wattage 1.5 W
DRIVER
Dimmable No
Driver Included Yes
Driver Type DALI DT1 Emergency
Wiring Type Re-wireable terminal block (5 pin)
EMERGENCY (EM SUFFIX)
Replacement Battery Code 01300
Emergency Classification C0:C12.5, C90:C20
Emergency Control DALI Monitored (DT1)
DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202.
Decal Size 300 x 150 mm
Emergency Duration 90 mins
Emergency Light Source Life >20Y/00M
AS2293.3-2018 Projection of Light source life for LED Exit signs (appendix E) Defines the projected time until the surface luminance falls below the minimum required surface luminance for an exit sign.
Emergency Mode Maintained
Emergency Output Power 1500 mW
Viewing Distance 24 m
COMPLIANCE
Product Design Life 12 years
The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use.
Standards
AS/NZS 60598.1
AS 60598.2.22
AS/NZS 61347.1
AS/NZS 61347.2.13
AS CISPR 15
AS/NZS 2293.3
WARRANTY
Commercial Use Warranty 8 RTB (Total 8 Years)